Sheffield Woodturning Club
SWC Home.What's New.Programme 10.Club Night Reports.Events.Photo Gallery.Site Map.Links.About Us.Contacts.
Date
Event
Presenter / Comments
14 January
Hands on
28 January
Demonstration

Margaret Garrard

Hot on the heels of her superb demo for us just three months ago, we have invited Margaret back to entertain and challenge us again.  This time she will demonstrate piercing and painting techniques.  Margaret is so innovative and well-prepared that it is a pleasure to watch her work, and members leave her demo inspired to try something different. www.margaretgarrard.co.uk
11 February
Demonstration

Colin Fishwick

+ Elston Sawmill
Colin is a teacher and demonstrator of traditional and contemporary woodturning, who used to be a teach in both Secondary and Adult Education.  During a session when Jimmy Clewes was teaching his son, his own interest in woodturning was kindled and he quickly sought knowledge and skills wherever they could be found.  Recommended by a member, we look forward to an interesting evening. www.fishwickwoodcrafts.co.uk 
25 February
Hands on
11 March
Club AGM
Annual General Meeting - followed by a Bring & Buy Sale - 7:00 pm start
25 March
Hands on
8 April
Demonstration

Sarah Thirlwell

+ Elston Sawmill
Sarah uses recycled and reclaimed materials such as yogurt pots, vending cups and reclaimed acrylic and plywood to produce a range of vessels, jewellery and functional interior products for domestic and commercial interiors.
This is completely different from anything the club have seen before so it should be an interesting night.
www.sarahthirlwell.com
22 April
Hands on
A ‘one-off’ special for tonight - Mark Raby will be joining us to show off his finishing techniques. What Mark doesn’t know about finishing, as they say,  “Isn’t worth knowing” - if you’ve ever wondered, oil, wax, sanding sealer; spray it, brush it, use a cloth, he’s got all the answers - Don’t miss it!  
13 May
Demonstration

Bob Chapman
Bob was one of the main demonstrators at last year’s AWGB seminar and SWC is happy to invite him back time and time again.  He always comes up with something new and this time it will probably be a spinning top box and a salt pot (small hollow form).  www.bobchapman.co.uk 
27 May
Hands on
10 June
Demonstration

Ian Clarkson

+ Elston Sawmill
Ian is a Tree Surgeon by trade and last year he gave us a quick lesson in the safe use of the chainsaw.  He is happy to repeat this (weather permitting) and to cut up wood brought along by members (as long as there’s not too much!!  Add to this his fine woodturning skills and a good evening should be had by all.  www.ianclarkson.com 
24 June
Hands on
8 July
Demonstration

Simon Hope
Simon is a young, and hugely talented turner, who not only creates innovative work, but also produces exactly the sort of tools woodturners want.  This is Simon’s first visit to our club and we’re looking forward to it.   
10 July
Gary Rance

Full Day Demo
Gary has been a woodturner all his working life. At the age of 16 he started a three year apprenticeship with a small woodturning company and after 18 months was put on piece work, turning mainly peppermills and kitchen ware. As a result of this he is considered to be one of the fastest and most accurate turners in the UK and is one of only a few whose income is derived solely from woodturning. He has demonstrated all over the world, including twice at the AWGB International Seminar and has taken courses at Craft Supplies’ in France. Given Gary’s years of experience, the range of things he makes and the speed at which he turns this should prove to be a very special day.
22 July
Hands on
12 August
Demonstration

Tracy Owen

+ Elston Sawmill
Tracy needs no introduction.  He has won many awards in National shows over the last twelve years and also writes articles for Woodturning magazine.  Having established himself as one of the few  woodturning professionals to derive his sole livelihood from woodturning, Tracy specialises in green wood turning of bowls and hollow forms to produce unique one off pieces. He also likes to add texture to his work which is achieved with sandblasting, carving, chain sawing, colouring and the use of the Robert Sorby texturing tool - which he invented.  www.tracyowen.com 
26 August
Hands on
9 September
Demonstration

Bob Neill
Change to the Planned Programme
Unfortunately, due to health problems, Dave Muckle will not be able to give his planned demonstration. However, Bob Neill, the pyrographer, has stepped into the breach for us. Bob will be known to many of our members for his demonstrations at Craft Supplies and also as a regular exhibitor at woodworking shows. Bob has been involved in arts & crafts all his life and  became part of the pyrographic revival in the late 1970s. He plans to do a hands-on evening with around 16 machines and some blanks of birch ply available for us to work on and suggests that some members could bring along some small bowls or platters to work on. This should be an interesting evening and quite different from our usual demonstrations.
23 September
Hands on
14 October
Demonstration

Andrew Hall

+ Elston Sawmill
Andrew Hall, an old favourite of the club, is returning to give another of his very interesting demonstrations. He is most famous for making wooden hats, which he demonstrated to us a couple of years ago then, in 2009 he gave an equally interesting demonstration of turning a whisky flask. So it will be interesting to see what he comes up with this time. www.hallwoodhats.co.uk
28 October
Hands on
11 November
Demonstration

Peter Tree
After seeing and appreciating examples of Peter’s work at the Woodfair in 2009, we decided to ask him to demonstrate for us.  He has over 30 years experience making chairs and has an extensive knowledge of English timbers and furniture making techniques. Widely recognised as one of England's leading furniture makers, tonight Peter will make a stool. www.petertree.co.uk
25 November
Hands on
9 December
Demonstration

Tony Wilson
Tony is well known to club members for his ready wit and excellent demonstrations, which will often teach you new or better techniques for turning everyday items. As well as being a very popular demonstrator, Tony teaches woodturning and holds regular turning clinics in his own workshop. It’s a couple of years since he visited our club, so this will be a welcome return.
16 December
Xmas Party Time
Please bring some food and drink!

Programme of events for 2010

All Demonstrations take place in the Grain Loft, from 7pm until 10pm, doors open from 6pm.

Write-ups of the demo evenings can be read here.

All Hands-on sessions take place in the Grain Loft, from 6pm until 9’ish.